Toro Multi Pro WM 41240, Руководство оператора

Страница: 47 / 84

Setting the Protect Settings
Important:
Use this function to lock and unlock
the application rate.
Note:
You must know the 4-digit PIN number to
change settings for functions in the protected menus.
1. From the Main Menu, press the center selection
button to navigate to the Settings menu.
2. Press the center selection button to highlight the
Protect Settings entry.
Note:
If there is no X in the box to the right
of Protect Settings entry, the sub-menus for L
Boom, C Boom, R Boom, and Reset Defaults
are not locked with the PIN (
Figure 64 ).
g028524
Figure 63
3. Press the right selection button.
Note:
The PIN entry screen appears
4. Enter the PIN; refer to step 4 in Entering the PIN
into the InfoCenter (page 46) .
5. Once the right-most value is set, press the right
selection button.
Note:
The Check Mark icon will appear above
the center selection button.
6. Press the center selection button.
Note:
The sub-menus for L Boom, C Boom, R
Boom, and Reset Defaults will appear.
7. Press the center selection button to highlight the
Protect Settings entry
8. Press the right selection button.
Note:
An X appears in the box to the to the
right of Protect Settings entry ( Figure 64 ).
g028523
Figure 64
9. Wait until the InfoCenter displays the “value
saved message” and the red indicator light
illuminates.
Note:
The sub-menus below the Protected
Menus entry are locked with the PIN.
Note:
To access the sub-menus, highlight the
Protect Settings entry, press the right selection
button, enter the PIN, and when the Check Mark
icon appears—press the center selection button.
Resetting the Boom Section Sizes to Default
1. Press the center selection button to navigate to
the Reset Default entry (
Figure 65 ).
g028526
Figure 65
2. Press the right selection button to select Reset
Default.
3. In the Default Settings screen, press the left
selection butt for No or the right selection button
for Yes (
Figure 65 ).
Note:
Selecting Yes will restore the boon
section sizes to the factory setting.
47