Toro Multi Pro WM 41240, Руководство оператора

Страница: 46 / 84

Note:
Holding the button down will increase the
value of the tank alert by 10%.
5. Press the left selection button to save and return
to the main menu
Entering the PIN into the InfoCenter
Note:
Entering the PIN allows you to change the
access protected settings and maintain the password.
Note:
The factory entered PIN number is 1234.
1. From the Main Menu, press the center selection
button to navigate to the Settings menu.
2. Press the center selection button to highlight the
Protected Menus setting.
g028522
Figure 61
3. Press the right select button to select Protected
Menus (A of
Figure 61 ).
4. Set the numerical value in the PIN entry screen
by pressing the following selection buttons:
•
Press the center selection button (B of Figure
61 ) to increase the numerical value (0 to 9)
•
Press the right selection button (C of Figure
61 ) to move the cursor to the next numerical
position to the right.
5. Once the right-most value is set, press the right
selection button.
Note:
The checkmark icon will appear above
the center selection button (D of Figure 61 ).
6. Press the center selection button (D of Figure
61 ) to enter the password.
Changing the PIN
1. Enter the current PIN; refer to steps 1 through
6 in Entering the PIN into the InfoCenter (page
46) .
2. From the Main Menu, press the center selection
button to navigate to the Settings menu.
3. Press the center selection button to highlight the
Protected Menus setting.
g028717
Figure 62
4. Press the right select button to select Protected
Menus (A of
Figure 62 ).
5. Enter the new PIN into the entry screen by
pressing the following selection buttons:
•
Press the center selection button (B of Figure
62 ) to increase the numerical value (0 to 9)
•
Press the right selection button (C of Figure
62 ) to move the cursor to the next numerical
position to the right.
6. Once the right-most value is set, press the right
selection button.
Note:
The Save icon will appear above the
center selection button (D of Figure 62 ).
7. Wait until the InfoCenter displays the “value
saved message” and the red indicator light
illuminates.
46