Toro Multi Pro WM 41240, Руководство оператора

Страница: 58 / 84

Maintenance
Note:
Looking for an Electrical Schematic or Hydraulic Schematic for your machine? Download a free copy
of the schematic by visiting www.Toro.com and searching for your machine from the Manuals link on the
home page.
Note:
Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
Before each use or daily
• Clean the suction strainer.
• Check the tank straps.
Every 50 hours
• Lubricate the pump.
Every 100 hours
• Lubricate the grease fittings.
• Lubricate the boom hinges.
Every 200 hours
• Inspect all hoses and connections for damage and proper attachment.
• Clean the flowmeter (More often when using wettable powders).
Every 400 hours
• Inspect the O-rings in the valve assemblies and replace them if necessary.
• Change the pressure filter.
• Inspect the pump diaphragm and replace if necessary
• Inspect the pump check valves and replace if necessary
• Inspect the nylon pivot bushings.
Yearly
• Flush the sprayer with clean water.
• Calibrate the agitation bypass valve.
Important:
Refer to the Operator's Manual for your machine and the owner’s manual for the engine for
additional maintenance procedures.
58