Toro Multi Pro 41394, Руководство оператора

Страница: 45 / 96

Towing the Sprayer
In case of an emergency, the sprayer can be towed
for a short distance after you open the tow valve.
However, we do not recommend this as a standard
procedure.
WARNING
Towing at excessive speeds could cause a
loss of steering control, resulting in personal
injury.
Never tow the sprayer at faster than 4.8 kph
(3 mph).
Towing the sprayer is a 2-person job. If the machine
must be moved a considerable distance, transport
it on a truck or trailer; refer to
Hauling the Machine
(page 44) .
1. Allow the exhaust system to cool completely.
2. Remove the undercarriage shroud; refer to
Removing the Undercarriage Shroud (page 51) .
3. Rotate the tow valve ( Figure 57 ) 90° in either
direction to open the tow valve.
g187500
Figure 57
1. Tow valve
Important:
If you do not open the tow valve
before towing the sprayer, you will damage
the transmission.
4. Affix a tow line to the frame; refer to the front and
rear towing points (
Figure 58 and Figure 59 ).
g002213
Figure 58
1. Front towing points
g002214
Figure 59
1. Rear towing points
5. Release the parking brake.
6. Tow the sprayer at less than 4.8 kph (3 mph).
7. When finished, close the tow valve and torque it
to 7 to 11 N∙m (5 to 8 ft-lb).
Important:
Before returning the machine to
service, install the undercarriage shroud;
refer to
Installing the Undercarriage Shroud
(page 52) .
45