Toro Multi Pro 41394, Руководство оператора

Страница: 84 / 96

Installing the Section-Manifold
Valve
1. Align the 2 gaskets that you removed in
Removing the Section-Manifold Valve (page
81)
to the flanges of the section-valve manifold
( Figure 119 ).
Note:
If needed, loosen the mounting hardware
for the left or right section-valve manifolds as
needed to provide clearance.
g191304
Figure 119
1. Flange locknut (1/4
inch—left and right
section-valve manifold
positions) 4. Flange (coupling adapter)
2. Section-bypass valve 5. Gasket
3. Quick-connect fitting
(section-valve manifold) 6. Flange-head bolt (1/4 x
3/4 inch—left and right
section-valve manifold
positions)
2. Align the flange of the section-valve manifold
between the flanges of the other section-valve
(s) and/or coupling adapter (
Figure 119 ).
3. Assemble the quick-connect fitting of the
section-valve manifold to the quick-disconnect
socket of the section-bypass valve with a
quick-connect pin (
Figure 119 and Figure 120 ).
g191303
Figure 120
1. Section-bypass valve 3. Quick-connect coupler
(section supply hose)
2. Quick-connect pins 4. Quick-connect fitting
(agitation valve manifold)
4. Loosely assemble the flange clamps that you
removed in
Removing the Section-Manifold
Valve (page 81) to the flanges of the
section-valve manifold and the flanges of the
other section-valve (s) and/or coupling adapter
(
Figure 121 ).
g191300
Figure 121
1. Flange (coupling adapter) 3. Section-manifold valve
2. Flange (section-manifold
valve) 4. Flange clamps
5. For left or right section-valve manifolds,
assemble the section-valve manifold to the valve
support (
Figure 119 ) with the 2 flange-head
bolts (1/4 x 3/4 inch) and 2 flange locknuts
(1/4 inch) that you removed in
Removing the
Section-Manifold Valve (page 81) .
84