Toro 08781, Руководство по установке, Страница: 9 / 20

7
Installing Hydraulic Lines
1, 2, and 5
Parts needed for this procedure:
1 Hydraulic cap
1 Hydraulic line number 1
1 Hydraulic line number 2
1 Hydraulic line (hose) number 5
Procedure
Use Figure 14 for identifying the correct hydraulic
lines.
g015920
Figure 14
1. Hydraulic line number 1 4. Hydraulic line number 4
2. Hydraulic line number 2 5. Hydraulic line (hose)
number 5
3. Hydraulic line number 3
Note:
Install all hydraulic lines loosely first and then
tighten them when everything is installed.
1. Install the hydraulic cap onto hydraulic line
number 1, port 1b.
2. Position hydraulic line number 1 into the
machine as shown in
Figure 15 .
3. Install hydraulic line number 1 to the tee fitting
assembled to the side of the valve (
Figure 15 ).
4. Install the hydraulic line number 1 to the upper
male coupler (
Figure 15 ).
g003608
Figure 15
1. Tee fitting on the side of
the valve 4. Upper male coupler
2. Valve 5. Coupler bracket
3. Hydraulic line number 1
5. Position hydraulic line number 2 into the
machine as shown in
Figure 16 .
6. Install hydraulic line number 2 to the tee fitting
assembled to the 90-degree elbow and the top
of the valve (
Figure 16 ).
7. Install hydraulic line number 2 to the upper
female coupler (
Figure 16 ).
g003607
Figure 16
1. Valve 4. Upper female coupler
2. Tee fitting assembled to
the 90-degree elbow 5. Coupler bracket
3. Hydraulic line number 2
8. Loosely install hydraulic line (hose) number 5 to
the lower male coupler (
Figure 17 ).
Note:
The other end of this hose will be
installed in Procedure 10.
9