Toro 08781, Руководство по установке, Страница: 14 / 20

8. Install the hydraulic hose with fittings to the
fitting on hydraulic line number 2 as shown in
Figure 29 .
g219889
Figure 29
1. Valve 3. Hydraulic hose with fittings
2. Fitting on hydraulic line
number 2
9. Install the hydraulic hose with fittings to the
45-degree elbow attached to the hydraulic pump
(
Figure 30 and Figure 31 ).
Note:
It will be below the hydraulic cylinder.
g003613
Figure 30
1. Fitting on hydraulic line
number 2 3. 45-degree elbow
2. Hydraulic hose with fittings 4. Hydraulic pump
10. Refer to Figure 31 for the correct locations of the
hoses and hydraulic lines to the hydraulic pump.
g003840
Figure 31
1. Hydraulic line number 3 4. Large hydraulic hose
2. Hydraulic hose with fittings 5. Hydraulic pump
3. Machine frame tube 6. Coupler bracket
11. Slide the 2 small hose clamps onto the small
molded hydraulic hose (
Figure 32 ).
12. Install the long leg of the molded hose onto the
90-degree tee in the hydraulic tank (
Figure 32 ).
13. Install the short leg of the molded hose onto the
barb end of hydraulic line number 4 (
Figure 32 ).
14. Tighten the two small hose clamps on each end
of the molded hose.
15. Loosely install the hydraulic line (hose) number
5 to the small 90-degree tee (
Figure 32 ).
14