Toro 08781, Руководство по установке, Страница: 12 / 20

11. Apply removable thread-locking compound to
the 2 setscrews (5/16 x 3/4 inch) and install them
into the hub assembly to secure the hydraulic
pump shaft (
Figure 21 ).
9
Installing Hydraulic Lines 3
and 4
Parts needed for this procedure:
1 Hydraulic line number 3
1 Hydraulic line number 4
Procedure
Note:
Install all hydraulic lines loosely first and then
tighten them when all everything is installed.
Use Figure 23 as a key for identifying the correct
hydraulic lines.
g015920
Figure 23
1. Hydraulic line number 1 4. Hydraulic line number 4
2. Hydraulic line number 2 5. Hydraulic line number 5
3. Hydraulic line number 3
1. Install the existing hoses back onto the hydraulic
tank.
2. Install the hydraulic tank to the frame and secure
it with the 3 brackets previously removed and
loosened (
Figure 24 ).
g003575
Figure 24
1. Hydraulic tank 4. Nut
2. Bolt 5. Side bracket
3. Top bracket 6. Washer
3. Install hydraulic line number 4 to the tee fitting
assembled to the side of the valve (
Figure 25 ).
g016164
Figure 25
1. Small 90-degree tee with
barb in hydraulic tank 4. Tee fitting
2. Hydraulic line number 4 5. Hydraulic tank
3. Valve
4. Position hydraulic line number 3 into the
machine as shown in
Figure 26 .
5. Install hydraulic line number 3 to the large
90-degree elbow installed to the strainer and
hydraulic tank (
Figure 26 and Figure 31 ).
12