
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
2
No parts required
–
Remove the air cleaner.
3
No parts required
–
Remove the hydraulic reservoir and
shrouds.
Small 90-degree tee with barb
1
Large 90-degree elbow (threaded both
ends)
1
4
Strainer
1
Install fittings to the hydraulic tank.
Retainer bracket
1
Muffler clamp
2
Hose-retainer bracket
1
5
Coupler bracket
1
Install the coupler bracket to the rear
frame.
Valve
1
Valve plate
1
Bolt (1/4 x 1-3/4 inches)
2
Nut (1/4 inch)
2
Small 90-degree elbow
1
Tee fitting
1
Thread-forming screw (9/32 x 3/4 inch)
2
Tee adapter
1
Relay
1
6
Cap
1
Install the manifold and bracket.
Hydraulic cap
1
Hydraulic line number 1
1
Hydraulic line number 2
1
7
Hydraulic line (hose) number 5
1
Install the hydraulic lines.
Hydraulic pump
1
45-degree fitting (male ends)
1
Hub assembly
1
Square key (1/4 x 1 inch)
1
Setscrew (5/16 x 3/4 inch)
4
Pump bracket
1
Bolt (with thread-locking compound)
(5/16 x 3/4 inch)
2
Washer (3/8 inch)
2
8
Large 90-degree elbow (with hose
barbed end)
1
Install the hydraulic pump.
Hydraulic line number 3
1
9
Hydraulic line number 4
1
Install the hydraulic lines.
3