Topex Voxell LCR, Руководство по установке, Страница: 9 / 60

INSTALLATION MANUAL
page 9 / 60
3 INSTALLATION
For installing the equipment, you must accomplish the following steps:
ƒ
configuring and installing the SIM card
ƒ
identifying the connectors
ƒ
connecting the cables and antenna
d FXO interface
performing other settings, via OAM or phone
Voxell LCR needs and adequate SIM card for the
GSM/GPRS/
Voxell LCR works with a SIM card that must be activated by GSM/GPRS/GSM/GPRS/UMTS
st be configured before to be inserted into the Voxell LCR slot. For
configuring the SIM card, use an ordinary GSM cell phone.
Req
If the check box „Change PIN Code” is enable, Voxell LCR will generated a new PIN Code,
unk
le GSM services – GSM operators offers you different supplementary services
for calls (divert calls, vocal messages). When you use the Voxell LCR interface is
le the roaming services because Voxell LCR
was designed for stationary working, with PBX exchange, not to go out in the field.
Disable Auto-Redial and Auto Answer
Set OFF for Dial-Again Interval, Call Waiting
~
Depending on your mobile phone type some of the above options are available or not.
ƒ
mounting the equipment
ƒ
powering the equipment
ƒ
setting the PIN or PUK code, if is required
ƒ
configuring the USB connection
ƒ
achieving a voice link by means FXS an
ƒ
3.1 Configuring and installing the SIM card
In order to work,
GSM/GPRS/UMTS operators to which you want to connect.
3.1.1
Configuring SIM card
operator. The SIM card mu
uired configurations:
PIN CODE REQUEST – enter the default value of the equipment PIN CODE - 1234.
~
The default value of equipment PIN CODE is 1234, if you want to change it use the OAM
application.
~
nown for user, which prevents using the SIM card on another terminal, so we recommend you
disable this option.
Disab
recommended that these options to be disable, because they are available only with
extra cost.
Disable Roaming – is required to disab