INSTALLATION MANUAL
page 20 / 60
Mounting on a desk / shelf
This means simply placing the Voxell LCR on a flat surface, which is safe e for sustaining the
weight of Voxell LCR and its belonging cables and accessories.
A desk, a table or a shelf is suited for mounting Voxell LCR FXS. To benefit of the best
performances you should place the equipment upper, in an area without obstacles.
5
POWER UP
Power up the Voxell LCR unit by plugging power adapter to the mains outlet – after a few
seconds, the middle LED, orange, will light up and start blinking. When the supply voltage is
detected by the equipment this is ready for function.
The power – up operation is the last which must be done, if you do not respect the
operations consecution the equipment can be damaged.
0
Remember that the power supply adapter is the disconnection device (there is no POWER
switch on Voxell LCR so the 230 V
AC
socket-outlet must be installed near the equipment and
must be easily accessible.
Before executing the operations from chapter 6 you must do the followings operations:
-
Install the USB driver – launch the „PL-2303 Driver Installer.exe” application (see chapter 7.1.)
-
Install the OAM program from the CD which consorts the equipment! – see the “Operation,
Administration and Maintenance” manual.