INSTALLATION MANUAL
page 55 / 60
11
ENVIRONMENTAL AND OPERATING CONDITIONS
Voxell LCR equipment must be installed in closed rooms, which follow these environment
conditions:
Operating temperature 5 to 50
o
C
Humidity 10 to 90%, without condense
The equipment must not be installed outside!
Also Voxell LCR will not be installed in flammable or explosive environments.
Voxell LCR must not be used in environments with high vibrations.
Use any kind of radio equipments can interfere with the medical equipments function, which
are not enough protected. Also other equipments can suffer interferences with Voxell LCR
equipment.
Voxell LCR must not be mounted in environments with strong electromagnetic interferences,
like: Xerox, monitors display, electrical motors.
It must not be stored in environment with extreme temperatures. When Voxell LCR unit is
moved from cold environments to warm environments, the equipment must not be start
immediately. It must be let half an hour to accommodate with the new temperatures, else
condensation may occur.
The mounting place will be selected according to conditions from installation chapter. The
location must have full signal from the mobile network for the external antenna.
When is functioning, the equipment must be protected from dust and solar radiations.
The equipment clean up will not be performed with aggressive substances. Also the
equipment must be manipulated with care, avoiding mechanical shocks.
Voxell LCR does not contain any kind of polluting materials or dangerous parts.
When you open up the equipment, first you have to pull up the power supple jack before you
disconnect the antenna or the others cables.
Interferences:
Some types of phone exchanges are more sensible to the radio-frequency interferences,
which might cause some noises. In this situation you have to place the Voxell LCR equipment as
far as you can from the PBX exchange.