Topex Voxell LCR Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 60

Topex Voxell LCR Скачать руководство пользователя страница 38

INSTALLATION MANUAL

page 38 / 60

Incoming call

•

on DISA (Direct Inward Service Access)

A call from mobile network is received.

Voxell LCR answers and opens a local line. The PBX exchange generates a dial tone. On this

tone, the caller dials the phone number: a local subscriber or an external number (see the chapter
5.6.).

The PBX exchange routes this call in the same way as it treats any call coming from a local

subscriber.

on Target (automatically routing to a specified extension)

A call over mobile network is received

Voxell LCR answers and opens a local line. The PBX exchange generates a dial tone. On this

tone, Voxell LCR assigns it a specified local extension (programmable Target). The engaged
extension rings and the calling, over mobile network is established. The local extension can be,
for instance, the support department, or the operator panel who directs manually the incoming

calls.

Outgoing call

The user dials the number of local interface, where Voxell LCR is connected. Voxell LCR

answers and generates dial tone. After receiving this tone, the caller dials the number of mobile
network subscriber he wants to reach. Voxell LCR transmits the numbering and makes the link
with mobile network.

You have the option „ON or OFF” for audio tone for dialing. In this last case the Voxell LCR

equipment do not offers audio tone, but still takes over and sends the detected digits.

A voice link can be initiated in the moment when Voxell LCR generates dial tone (by default

continuously tone, frequency 420 Hz). But the Topex equipment allows you to u customize the dial
and busy tones, as well as the ringing sound.

The telephone sets, the PBX extension or exchange trunk can send to Voxell LCR the call in

DTMF mode or PULSE mode. If the number of digits is smaller than number of digits that are
waited for by Voxell LCR (programmable parameter), then, after a delay (also programmable,
typically about 10 seconds), the call is transferred to GSM/GPRS/UMTS modem.

If you want to send immediately the call, after the last digit you should press "#".

«
...
36
37
38
39
40
...
»

Содержание Voxell LCR





























































Отзывы:

Нет отзывов