manualshive.com logo in svg

Topcon Pocket-3D, Справочное руководство, Страница: 96 / 316

Поделиться
Скачать
Topcon Pocket-3D Скачать руководство пользователя страница 96

Setup Menu

Pocket-3D Reference Guide

2-50

To delete a message, do the following:

1. Press 

Setup

Site-Link

Delete message(s) (

Figure 2-67).

2. Press 

Ok

 to delete all messages and return to the Main Screen 

(Figure 2-67).

Figure 2-67. Delete Messages

Send Any File to the Jobsite

If there is a file the machine operator needs, it is possible to send a file 
to the operator without delay.

1. Press 

Setup

Site-Link

Send any file (

Figure 2-68

 

on 

page 2-51

).

2. On the 

Open

 dialog box, highlight a file to select it and press 

Open

.

3. On the 

Send

 dialog box, highlight a file to send in to 

To

 field.

In the To field, you can select the machine, office computer, or 
any other survey crew to send the file(s) to. 

4. Press control-Shift to send to multiple people. You can even send 

the file to people off-line if the 

Show offline clients

 box is 

NOTE

When a new message arrives in Pocket-3D, you will 
hear a “Ding-Dong” sound on the main screen.

Содержание Pocket-3D





























































































































































































































































































































Отзывы:

Нет отзывов