Topcon Pocket-3D Скачать руководство пользователя страница 302

Страница: 302 / 316

Display Menu

Pocket-3D Reference Guide

5-8

Cut/fill History

For mmGPS applications only, Pocket-3D has an option to view the
cut/fill history of the loaded project.
To display the cut/fill history, tap

Display



Cut/fill history

(Figure 5-9).

Figure 5-9. Display



Cut/fill History

The cut/fill window (Figure 5-10 on page 5-8) displays the on-going
highs and lows of the project as determined by both laser and GPS
readings.

• The red line indicates mmGPS detection.
• The blue line indicates GPS only detection.

Figure 5-10. Cut/Fill History

See “Cut/Fill “Real-Time” Updates” on page 4-24 for more
information on this option.

Содержание Pocket-3D





























































































































































































































































































































Результаты поиска

Содержание Pocket-3D

Отзывы:

Topcon Pocket-3D, Справочное руководство, Страница: 302 / 316

Результаты поиска

Содержание Pocket-3D

Отзывы: