Topcon Pocket-3D Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 316

Topcon Pocket-3D Скачать руководство пользователя страница 11

P/N 7010-0628

Preface

iii

Preface

Thank you for purchasing your Topcon receiver, survey product,
software product, or accessory (the “Product”). The materials
available in this manual (the “Manual”) have been prepared by
Topcon Positioning Systems, Inc. (“TPS”) for owners of Topcon
products. This Manual is designed to assist owners with the use of the
Product and/or software (the “Software”) used with the Product and
its use is subject to these terms and conditions (the “Terms and
Conditions”).

Terms and Conditions

USE

This product is designed to be used by a professional. The user

should have a good knowledge of the safe use of the product and
implement the types of safety procedures recommended by the local
government protection agency for both private use and commercial
job sites.

COPYRIGHT

All information contained in this Manual is the

intellectual property of, and copyrighted material of TPS. All rights
are reserved. You may not use, access, copy, store, display, create
derivative works of, sell, modify, publish, distribute, or allow any
third party access to, any graphics, content, information or data in this
Manual without TPS’ express written consent and may only use such
information for the care and operation of your Product. The
information and data in this Manual are a valuable asset of TPS and
are developed by the expenditure of considerable work, time and

NOTICE

Please read these Terms and Conditions carefully.

«
...
9
10
11
12
13
...
»

Содержание Pocket-3D





























































































































































































































































































































Отзывы:

Нет отзывов