Topcon Pocket-3D Скачать руководство пользователя страница 20

Страница: 20 / 316

See “Cut/Fill “Real-Time” Updates” on page 4-24 for more
information on how to access and use the grade indicator.



Cosmetic Changes:

• Buttons now have 3D edges.
• Menu items, surface, and equipment lists now have

descriptive bitmaps.



Miscellaneous Changes:

• File and point lists are now sorted alphabetically. Point lists

can also be sorted by clicking the column header.

• Point description fields are now drop-down lists where

previously set descriptions can be retrieved.

• Multiple selections have been added for Points, Lines,

Layers, and Surfaces.

• New layers can now be created inside the layer selection

drop-down list.

• Updated projections list, now also includes support for table

projection and multiple datums.

• Polyline segments can be viewed and edited within a list.
• The direction of a polyline can now be reversed by using the

pop-up menu. Click

Linework>Reverse

from the context

pop-up menu, which is activated by holding the stylus down
for one second or alternatively pressing the

ALT

button.



See “Main Screen” on page 1-6 for more information.

• Also, in the context menu, the length of the selected polyline

and single or multiple polyline segments can be shown. Click

Calcs >

Station

• Polylines can now be joined together.
• Added support for NAD83_NO_Trans. This is an added

datum option to support the use of a non-Topcon base station.
There is a difference between NAD83 and WGS84
parameters. When using a non-Topcon base station, a shift
would appear. A third-party base receiver use to be the only
option.



See “Support for non-Topcon Base Station” on page 3-22 for

Содержание Pocket-3D





























































































































































































































































































































Результаты поиска

Содержание Pocket-3D

Отзывы:

Topcon Pocket-3D, Справочное руководство, Страница: 20 / 316

Результаты поиска

Содержание Pocket-3D

Отзывы: