Topcon Pocket-3D, Справочное руководство, Страница: 56 / 316

Setup Menu
Pocket-3D Reference Guide
2-10
On the
radio setup
dialog box, set the following parameters
(Figure 2-15):
• Radio type – the type of radio.
• Port – the port used for radio connection.
• Baud rate – the speed of communication rate between the radio
unit and the GPS+ receiver.
• Format – current GPS+ systems are capable of either CMR or
RTCM corrections.
•
Configure
– changes the radio channel; press to display the
channel configuration
dialog box (Figure 2-15). Select the
desired channel and the corresponding Frequency displays.
•
Set
– press to apply the radio channel parameters.
•
Next
– press to display the
GPS receiver settings
dialog box
(Figure 2-16 on page 2-11).
Figure 2-15. Radio Setup and Channel Configuration Dialog Boxes
On the
GPS receiver settings
dialog box (Figure 2-16 on page 2-11)
do the following and press
Finish
to connect to the GPS receiver.
• Use co-op tracking – if enabled, allows higher efficiency of
multipath reduction. This option is only valid for a base station
receiver (non-moving).
• Use multipath reduction – if enabled, reduces multiple reflections
from nearby objects.