Topcon Pocket-3D Скачать руководство пользователя страница 158

Страница: 158 / 316

Data Menu

Pocket-3D Reference Guide

3-48

1. To change the view options of the selected surface, tap

Data



Alignment



Options

2. On the

alignment options

dialog box do the following and press

(Figure 3-69):

• Feature lines/Center lines – enable to show the feature/center

lines on the surface.

• Transition pts – enable to display the transition points on the

surface.

• Station lines – enable to show the station lines at a set interval

on the surface.

• Station pts – enable to show station points on the main

screen.

– Interval: enter the desired interval for station points.

Use the

color

buttons on the left to set a color for the enabled

option.

Figure 3-69. Alignment Options – Road Surface Models

Current File or <none>

Displays the currently loaded Alignment file. If no file is currently
selected, displays “<none>”.
To access available Alignment files or to create a new Alignment file,

Содержание Pocket-3D





























































































































































































































































































































Результаты поиска

Содержание Pocket-3D

Отзывы:

Topcon Pocket-3D, Справочное руководство, Страница: 158 / 316

Результаты поиска

Содержание Pocket-3D

Отзывы: