manualshive.com logo in svg

Topcon Pocket-3D, Справочное руководство, Страница: 13 / 316

Поделиться
Скачать
Topcon Pocket-3D Скачать руководство пользователя страница 13

Terms and Conditions

P/N 7010-0628

v

LICENSE AGREEMENT 

Use of the Software and any other computer 

programs or software supplied by TPS or downloaded from a TPS 
website (the “Software”) to be used with a Topcon Product constitutes 
acceptance of these Terms and Conditions in this Manual and an 
agreement to abide by these Terms and Conditions. The user is 
granted a personal, non-exclusive, non-transferable license to use 
such Software under the terms stated herein and in any case only with 
a single Product or single computer. You may make one (1) backup 
copy of the Software. Otherwise, the Software may not be copied or 
reproduced. You may not assign or transfer the Software or this 
license without the express written consent of TPS. This license is 
effective until terminated. You may terminate the license at any time 
by destroying the Software and Manual. TPS may terminate the 
license if you fail to comply with any of the Terms or Conditions. You 
agree to destroy the Software and manual upon termination of your 
use of the Product. All ownership, copyright and other intellectual 
property rights in and to the Software belong to TPS. If these license 
terms are not acceptable, return any unused Software and the Manual.

CONFIDENTIALITY 

This Manual, its contents and the Software 

(collectively, the “Confidential Information”) are the confidential and 
proprietary information of TPS. You agree to treat TPS’ Confidential 
Information with a degree of care no less stringent than the degree of 
care you would use in safeguarding your own most valuable trade 
secrets. Nothing in this paragraph shall restrict you from disclosing 
Confidential Information to your employees as may be necessary or 
appropriate to operate or care for the Product. Such employees must 
also keep the Confidentiality Information confidential. In the event you 
become legally compelled to disclose any of the Confidential 
Information, you shall give TPS immediate notice so that it may seek a 
protective order or other appropriate remedy.

WEBSITE; OTHER STATEMENTS 

No statement contained at the 

TPS website (or any other website) or in any other advertisements or 
TPS literature or made by an employee or independent contractor of 
TPS modifies these Terms and Conditions (including the Software 
License Agreement, Disclaimer of Warranty and limitation of 
liability).

Содержание Pocket-3D





























































































































































































































































































































Отзывы:

Нет отзывов