Topcon Pocket-3D Скачать руководство пользователя страница 57

Страница: 57 / 316

GPS Applications

P/N 7010-0628

2-11

• Use GLONASS satellites – if enabled, these satellites will not be

included in the position calculations and will not display on the
satellite plot if disabled.

Figure 2-16. Select GPS Receiver Settings

Units

To set project units, tap

Setup



Units

(Figure 2-17).

Figure 2-17. Setup



Units

On the

units

dialog box (Figure 2-18 on page 2-12), select the desired

units for each item from the drop-down lists. Press

to continue;

Pocket-3D saves the entered units.
The units can be changed at any time; Pocket-3D automatically saves
the changes.

• Distances – select either

Meters

US Survey feet

International

feet

, or

Feet + Inches

Содержание Pocket-3D





























































































































































































































































































































Результаты поиска

Содержание Pocket-3D

Отзывы:

Topcon Pocket-3D, Справочное руководство, Страница: 57 / 316

Результаты поиска

Содержание Pocket-3D

Отзывы: