received. When a new message arrives at any time, you'll see an icon in the top-left corner of the
navigation view. Tapping on this will open the message, without having to use this menu option.
Tap on
OPt to quickly 'Call sender', 'Reply to message' or 'Forward message'.
Choose '
Read outbox messages'
to browse through messages that are waiting to be (or
have been) sent.
Choose '
Write message
'
to create a new message, with a similar choice of destination
numbers as when placing a call.
Note
: Be careful to only write messages to mobile phone numbers. Since there is no standard
international way of identifying these from landline numbers, knowing which is which is your
responsibility!
Other phone functions
Other phone functions
In order to place calls and create text messages easily and conveniently, you should use '
Get
numbers from phone
'
to copy the contact numbers from your Bluetooth mobile phone into
the memory of your TomTom GO. This may take a few minutes, so please be patient.
Use '
Change home number
'
to enter a specific number (or pick from recent callers or
recently-dialed numbers) as your 'home'.
Common Questions and Troubleshooting
Common Questions and Troubleshooting
Here are some of the questions you may need to ask. For more questions and answers,
see
Why is the navigation view now in black and white? Why won't 'Navigate to...' work?
If the GPS receiver loses reception from the orbiting satellites, usually due to surrounding tall
buildings, the map display is switched into monochrome, to warn you that the information shown
may not be accurate at that moment. As soon as reception is regained, the display will automatically
switch back to color.
How do I charge the unit?
(GO users only)
TomTom GO is normally charged whenever it's plugged into your vehicle's 12V electrical system
using the supplied DC power lead. Note that if your engine is turned off then you may need to
switch your vehicle ignition into an 'Accessories' position. Consult your vehicle handbook. If you
need to charge TomTom GO at other times, use the international AC adapter (5V), also provided.
How can I reset TomTom GO?
(GO users only)
You should never have to reset TomTom GO under normal circumstances. However, in the event of
a problem you can reset the unit by removing it from the cradle and using a straightened paper clip
in the reset hole on the unit's bottom (just behind the release button).
How do I get support?
Visit
www.tomtom.com
for technical support and contact information. Our preferred means of
communication is by email.
