communications are prohibited, you should use the preference '
Disable Bluetooth
'
. When
required again, simply use '
Enable Bluetooth
'
.
Tip
: Disabling the Bluetooth transmitter in your device also helps prolong battery life if not currently
plugged into a charging source.
Show version
Show version
Use '
Show version
'
to find out exact version information for your TomTom system. Select
'
Copyright
' to read the appropriate copyright listing.
Docking preferences
Docking preferences
(TomTom GO users
(TomTom GO users only)
only)
If you have the Professional Docking Kit installed, choose '
Docking preferences
'
to choose
whether to link TomTom GO's night view to your vehicle's headlights and to choose whether you
want your car radio muted while route instructions are being given.
Disable/Enable ASN
Disable/Enable ASN
(TomTom GO 700 and 500 users
(TomTom GO 700 and 500 users only)
only)
TomTom GO keeps up with you, even without proper GPS reception for a short while, e.g. in
tunnels. This is accomplished by a sensor system that measures your movement, called ASN
(Assisted Satellite Navigation). If you are curious about how it works, try it out by using '
Disable
ASN
'
to turn it off, while having no GPS reception, and compare the results to those with
ASN turned on, as it is by default. Use '
Enable ASN
'
to turn ASN on again.
Connecting to Your PC
Connecting to Your PC
To get the most from your TomTom system, you can link it to your PC or Mac, from where
you can back up (and restore) your Favorite locations and preferences, load new maps
and install new navigation voices.
Locate the USB data cable and plug the smaller end into the back of TomTom GO. Plug the larger
USB connector into a spare port on your Windows PC or Mac.
Note
: While TomTom GO is connected to your PC (Windows will recognize it as a 'Mass storage
device'), you won't be able to use it to look up routes. Normal operation is restored as soon as you
disconnect from the PC.
Insert the TomTom GO installation CD into your PC's CD/DVD drive and the Setup program should
launch automatically.
Tip
: If your PC is configured not to run CDs automatically, use 'My Computer' (or Windows Explorer) to
browse to the TomTom GO CD and then double-click on the file 'Setup'.
