TomTom GO Manual
TomTom GO Manual
Note
: Some of the material below is duplicated from the Quick Start Guide that came with your
TomTom system, for your convenience.
Switching on for the first time
Switching on for the first time
Starting up
Starting up
1. Refer to your installation poster for setup instructions.
2. Follow the on-screen instructions, using your finger on the touchscreen to select your preferences.
Using TomTom GO
Using TomTom GO
Note
: Your TomTom GO does not transmit your location, so others cannot use it to track you while
driving.
TomTom GO starts by displaying the navigation view. The screen will appear in black and white until
your TomTom GO locates your current position. Once this is done, the navigation view is shown in
full color. In future, your position will be found much faster, normally within a few seconds.
Everything on TomTom GO can be accomplished easily using just your finger on the touchscreen.
Note: you can bring up the main options menu by tapping your finger somewhere in the middle of
the screen.
As with many of the menus in TomTom GO, there are more options than can be shown on
one screen. Try tapping on
a few times, to cycle through all the different things you can
do.
How to plan your first route
How to plan your first route
1.
Move outside, if you haven't already done so, so that the GPS hardware can locate your
position. This may take some time, and will happen more quickly if you remain still. The screen
displays your current position on its map, represented in a '3D' navigation view, from a driver's
perspective. When you start moving, the navigation view will match the streets outside as you
would see them through your windshield.
