74
MINI-STATION D‘ÉPURATION ENTIÈREMENT BIOLOGIQUE POUR LES PÉNICHES, LES YACHTS ET LES MAISONS MOBILES
enteron | Manuel d‘utilisateur
Fonction
Bouton sur la télécommande
Si le niveau Si le niveau dans le réservoir de collecte est atteint, il doit
être pompé manuellement en tournant le bouton sur le mode OUT
(en
mode automatique, cela se fait sans influence de l’utilisateur)
. Ce
bouton n’est actif que lorsque vous travaillez en mode
MANUALLY
.
Après avoir brièvement tourné Le bouton sur MAN, le cycle de dés
-
infection et de vidange est démarré.
ATTENTION :
Même en mode
AUTOMATIQUE
(standard), la LED rouge est régulièrement allumée
brièvement jusqu’à ce que le réservoir soit pompé. Ceci représente une
fonction normale de la station et seulement un éclairage prolongé sans
pompage en mode standard est un dysfonctionnement. Pour ce faire,
pomper d’abord manuellement pour vérifier le fonctionnement de la
pompe.
OUT
Vider
Affichage LED
Pas actif ou
ROUGE
Fonction
Bouton sur la télécommande
Tourner le bouton sur le mode
MANUALLY
empêche le vidage auto-
matique du réservoir, une LED rouge sur le bouton supérieur indique
le niveau atteint. Ce mode active également le commutateur ci-dessous
pour les pompes.
MANUALLY
Mode manuel de
fonctionnement
Affichage LED
VERT
Fonction
Bouton sur la télécommande
En tournant le bouton sur la position MAC, la station sera transvasée
manuellement. C‘est nécessaire une fois par semaine pour la mainte-
nance ou en cas d’un blocage imminent et d’évitement des boues. Ce
bouton n‘est actif que lorsque en mode
MANUALLY
.
MAC
Transvaser
Affichage LED
Pas actif ou
ROUGE
EXPLICATION DES COMMANDES ET DES INDICATEURS
SUR LA TÉLÉCOMMANDE
contrôle d‘
enteron