66
MINI-STATION D‘ÉPURATION ENTIÈREMENT BIOLOGIQUE POUR LES PÉNICHES, LES YACHTS ET LES MAISONS MOBILES
enteron | Manuel d‘utilisateur
Sur demande, nous fournissons toutes les pièces nécessaires au montage.
Prière d’indiquer la tension de fonctionnement à bord, les longueurs de câble
requises entre la commande du système et la télécommande et, si nécessaire,
les longueurs de tuyau requises. Nous fournissons également des soupapes
d‘échappement appropriées (TRUDESIGN) et des dégazeurs.
Il est essentiel d‘utiliser des câbles suffisamment dimensionnés pour l‘utilisa
-
tion à bord (des câbles en caoutchouc à double isolation) avec un fusible appro-
prié pour l‘alimentation électrique. La section minimale est de 4 mm² pour les
systèmes électriques du véhicule de 12 volts ou de 2,5 mm² pour les systèmes
électriques du bord de 24 volts. La station ne puisse être utilisée qu’avec une
batterie tampon et en aucun cas directement connectée sur des chargeurs ou
des systèmes d‘alimentation DC en raison des courants de démarrage appa-
rents de la pompe de macération. Veuillez demander la configuration appro
-
priée à l’avance si vous n‘avez pas un réseau de bord de 12 ou 24 volts
La connexion de la station ne peut être effectuée que lorsque l’interrupteur
principal de la batterie est éteint. Les règles de base du câblage électrique et de
la protection du circuit doivent être respectées.
Assurez-vous que les
aliments inutiles sont
scellés contre les liqui-
des et les odeurs !
L’enteron nécessite les connexions suivantes pour l’opération :
Arrivée : diamètre intérieur de 38 mm,
tuyau d‘égout étanche aux odeurs;
nous recommandons des produits de marque que nous pouvons livrer sur
demande ; il s‘agit de fournir une entrée directe (si possible verticale) et in-
clinée vers le bas de les toilettes vers l‘entrée de la station.
Vidange : diamètre intérieur de 25 mm,
tuyau d’eau étanche aux odeurs,
voir ci-dessus ; Sortie directement sur ou juste au-dessus / en dessous de la
ligne de flottaison possible, n’oubliez pas le col de cygne vers le haut ; une
vanne de coque doit être installée au-dessous de la ligne de flottaison (de
préférence en plastique TRUDESIGN ou similaire) pour la sécurité.
Ventilation : diamètre intérieur de 25 mm,
tuyau d‘eau étanche aux odeurs,
voir ci-dessus ; ce tuyau va d’abord de la station à la cartouche de filtre à
charbon et de là à un aérateur latéralement vers l‘extérieur. La cartouche
de filtre à charbon doit être installée verticalement pour faire couler l’eau
de condensation.
Tension de fonctionnement : Le système nécessite 12 V avec un fusible de
20 A (lent) ou 24 V avec un fusible de 10 A.