BELT SANDER
TECHNICAL SPECIFICATIONS
PRODUCTINFORMATION
Fig. A
The belt sander is the perfect tool to sand wood and to
grind iron, plastic or similar materials.
The belt sander must be used for the rough work, for the
normal sanding work an orbital sander must be used.
1. On/off switch
2. Front handle
3. Rear handle
4. Blocking switch
5. Dust collection opening
6 Adjusting knob
7. Sanding belt fastener
8. Front belt roller
9. Direction indicator
10. Drive belt cover
11. Dust bag
PACKAGE CONTENTS
1
Belt sander
3 Sanding
belts
1 Dust collection bag
1 Instruction manual
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories for
transport damage.
SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury.
Read the following safety instructions and also the
enclosed safety instructions.
•
If you are working with the sanding machine, wear
always ear protectors and dust mask.
•
The sanding machine is not suitable for wet sanding.
•
Check if the switch is not in position “ON”, before
you connect the mains plug to the mains voltage.
•
Keep the mains lead always away from moving parts
of the tools.
•
Use safety glasses, especially when you sand above
your head.
•
Do not bring pressure to your machine, this will only
delay the sanding.
IMMEDIATELY SWITCH OFF THE MACHINE
WHEN:
•
Excessive sparking of the carbon brushes and vertici-
liosis in the collector.
•
Interruption of the mains plug, mains lead or mains
lead damage.
•
Defect switch
•
Smoke or stench of scorched isolation
2
3
8
10
6
9
1
7
4
11
5
Voltage | 230
V~
Frequency | 50
Hz
Power input
| 800 W
No load sander paper speed
| 280 m/min
Sanding belt size
| 75 x 533 mm
Sanding pad size
| 75 x 1360 mm
Weight | 3.0
kg
Lpa (Sound pressure)
| 88.6 dB(A)
Lwa (Sound power level)
| 101.6 dB(A)
Vibration value
| 3.511 m/s
2
2
Toledo
Toledo
51
EXPLODED VIEW
