Tokheim Quantium 510, Руководство по установке

Страница: 93 / 143

Document Ref 942583-001 Rev 8
Page 5-7
Quantium 510 Installation Manual Installation
5.4.2 DISPENSER WITHOUT LIFTING SLOTS AND ON METAL
TRANSPORT PROFILE
1) Unload the dispenser from the
transport truck and place it on even
ground. Remove the forklift truck and
remove the transport packaging.
2) Raise the dispenser approximately
20mm off the ground and using a
10mm spanner or socket, loosen and
remove the bolts on the centre
wooden blocks connected to the metal
profiles. Remove the wooden blocks,
then lower the dispenser onto the
ground resting it on the two wooden
end blocks.
Follow the instructions in section 4.6 to access the dispenser hydraulic area and
remove the hydraulic doors from both sides of the dispenser.
3) Locate the 19mm nuts holding the
metal profiles to the driptray.
Unscrew the nuts, remove the
bolts and remove the profiles.