Tokheim Quantium 510, Руководство по установке

Страница: 80 / 143

Page 4-4
Document Ref 942583-001 Rev 8
Packaging & Handling Quantium 510 Installation Manual
4.6 Access the Hydraulic Area
The following instructions detail the procedure to be followed for the removal of the hydraulic
door(s) to allow safe access to the dispenser hydraulics.
1) Locate the keys for the hydraulic door.
2) Simultaneously open both keylocks on the relevant
hydraulic door.
3) Disconnect the earth cable from the hydraulic door.
4) Disconnect the retaining cords on the hydraulic door.
5) Lift up the hydraulic door to release the locating pins
from the holes in the driptray.
6) Remove the door completely and place in a safe position.
7) Repeat for the opposite side of the dispenser if required.
8) To refit, insert the locating pins on the bottom of the
hydraulic door into the designated holes in the driptray.
9) Simultaneously close both keylocks and remove keys for
safe keeping.
10) Close the dust caps to prevent water or dirt entering the
keylock.
4.7 Access the Calculator Head
The following instructions detail the procedure to be followed to allow safe access to the
calculator head.
4.7.1 STANDARD HEAD
• Locate the key for the calculator
head door.
• Unlock the calculator head door on
the relevant side of the dispenser.
• Carefully open the calculator head
door (side hinge).
• Repeat for the opposite side of the
dispenser as required.