Tokheim Quantium 510, Руководство по установке

Страница: 101 / 143

Document Ref 942583-001 Rev 8
Page 5-15
Quantium 510 Installation Manual Installation
1) Unload the dispenser from the
transport truck and place it on even
ground. Remove the forklift truck
and remove the transport packaging.
2) Raise the dispenser approximatley
20mm off the ground and using a
10mm spanner or socket, loosen
and remove the bolts on the centre
wooden blocks connected to the
metal profiles. Remove the wooden
blocks, then lower the dispenser
onto the ground resting it on the two
wooden end blocks.
Follow the instructions in section 4.6 to access the dispenser hydraulic area and
remove the hydraulic doors from both sides of the dispenser.
3) Locate the 19mm nuts holding the
metal profiles to the driptray.
Unscrew the nuts, remove the bolts
and remove the profiles.
5.4.5 DISPENSER WITH LIFTING SLOTS AND ON METAL TRANSIT
PROFILE