Tokheim Quantium 510, Руководство по установке

Страница: 92 / 143

Page 5-6
Document Ref 942583-001 Rev 8
Installation Quantium 510 Installation Manual
9) Raise the dispenser approximately 20mm off the
ground and using a 19mm spanner or socket,
loosen and remove the bolts holding the end pallet
sections. Remove the wooden end sections from
both sides of the dispenser.
10) Carefully position the dispenser over the
cradle so that the filter boxes are directly
above the fuel supply risers. Lower the
dispenser slowly, aligning the mounting holes
on the driptray with the mounting holes on
the cradle.
11) Use the mounting hole closest to the hydraulic
end as a first locating point.
Follow the instructions in section 5.4.8 to
secure the dispenser using all 4 mounting
holes.
12) With the dispenser now secure, remove the retaining ratchet straps.
Ensure that the area around the dispenser is clear of all personnel, then slowly
remove the forklift and move it away from the dispenser.
Dispenser placement is complete.