TOHATSU MFS 5C LPG, Руководство пользователя

Страница: 53 / 292

INSPECTION AND MAINTENANCE
51
10
2. Turn the steering on the outboard
motor left.
3. Put a oil drain pan under the oil drain
screw.
4. Remove the oil drain screw and com-
pletely drain oil from the engine.
1. Drain hole
5. Tighten the oil drain screw with apply-
ing oil on the sealing surface of screw.
(Use new oil drain washer)
Oil drain screw specified torque
18Nm (13 ft
-
lb, 1.8 kgf
-
m)
ENON00028-A
Note
If a torque-wrench is not available when
you are fitting a oil filter, a good estimate
of the correct torque is 3/4 to 1 a turn past
finger-tight. Have the oil filter adjusted to
the correct torque as soon as possible with
a torque-wrench.
6. Reset the engine in a vertical posi-
tion.
7. Repeat 3 to 7 procedures two or
three times to drain the oil com-
pletely.
8. Remove the top cowl and the oil filler
cap.
9. Fill the engine through filler port with
recommended oil (see chart below)
to the middle of dipstick mark.
10. Tighten the oil filler cap.
1. Oil filler cap (Dipstick)
1. Upper limit (Max.)
2. Lower limit (Min.)
ENON00920-0
Note
Use only recommended engine oil (See
page 12)
ENOF01513-0
1
1
ENOF00446-0
1
2
ENOF00447-0
10W−40
10W−30
˚C
˚F
40
96 30
86 20
68 10
50
0
32
-10
14
-20
-4
-30
-22
ENOF00208-0