TNI softFlow 50, Руководство по эксплуатации

Страница: 27 / 56

27
Operating Instruction TNI soft Flow 50 homecare system
4) Selecting the therapy parameters and system configuration
menu
WARNING
• In order to set the therapy parameters, the device has to be completely assembled and also
needs to be in operating mode as described in chapter 3.
• The parameters are called up via the menu and the function keys and also adjusted and
stored (please note capture 3.3).
• The device has stored the previous parameter settings and is started with these settings
after a restart.
The following therapy parameter can be changed:
o Humidity ( dew point) in °DP
The following menue points are admitted for system configuration:
o
Language
o Time
o Date
The following menue points supply system information:
o
System information
o Therapy hours
o Service menue access blocked, only for technical staff!
o Clinic menue access blocked, only for technical staff!
4.1) Therapy parameters
4.1.1) Statement on the indicated display values
Nominal and Real value shown on the operating display.
WARNING
NOMINAL and REAL VALUE:
• The nominal value describes the value the system should deliver as a regulated therapy value.
• Reaching these therapy values and providing them correctly is described as the real value.
• In the settings, the nominal value defines the targeted value for the system.
• In an optimal situation, the real value differs only slightly from the nominal value.
• For more information on tolerance specifications see chapter 7 “Technical Data”.
SAFETY NOTE
• The real value is mandatory for therapy.
• The real value ensures a successful therapy.
• Alarms and notes on the display indicate deviations from the tolerance limit.
NOMINAL VALUES
• On the bottom line the display shows the programmed nominal values, which corresponds
to the last programmed therapy parameters.
o
Humidity (dew point) in °DP
o Flow rate in l/min