TNI softFlow 50, Руководство по эксплуатации

Страница: 21 / 56

21
Operating Instruction TNI soft Flow 50 homecare system
3.2) Starting and stopping the TNI
soft
Flow
50
WARNING
To avoid electric shocks,
• make sure that the TNI
soft
Flow
50
is dry before connecting it to the power supply.
• make sure that the voltage (100-240 V) and mains frequency (50-60 Hz) admissible for the
TNI soft
Flow
50
comply with your local characteristics.
3.2.1) Switching on / off
• To turn on the TNI soft Flow 50 press the main switch at the right side of the device. Move
the rocker switch to „1“.
• The device switches on showing for approximately 5 seconds
o the firmware-status and
o the selected humidifier type
• and begins to operate.
• During the first commissioning the system starts with the factury-set system and parameter
values (humidification = 30°TP and flow rate = 10 l/min).
• After the first application the system starts with the previously set values.
• If necessary, apply the required quantity oxygen to the TNI
soft
Flow
50
.
3.2.2) Activating standby-mode
• Stopp the oxygen supply.
• Press
• The system turns off.
• The
TNI soft
Flow
50
shows the standby display.
3.2.3) Deactivating standby-mode
• Press
• The system turns on.
• The display shows the operation mode.