18
Control panel
HELIX
Security code Screen*
SECURITY CODE
CHANGE-2
MENU-1
The Security Code screen allows the
user to set a four digit security code
to prevent unauthorized use of the sprayer. If a security code
has been set, the control system display will ask for the code
at startup. If the correct code is entered, the display will show
the Main Screen and the sprayer will operate. If the wrong
code is entered, the display will continue to ask for the correct
code and the sprayer will be disabled. To set or change the
security code, press the #2 key.
i
If the sprayer is new, no security code is set and
the Main Screen will appear at startup. When
setting a security code for the first time, the
“Enter Old Code Number” screen will appear, and
you will need to enter “1111”.
ENTER OLD CODE
NUMBER
Enter the old security code number
to access the screen that allows the
code change. If the wrong code is
entered, the display will continue
to ask for the correct code and the security code cannot be
changed.
ENTER NEW CODE
NUMBER
XXXX
RE-ENTER NEW
NUMBER
XXXX
NEW CODE NUMBER
ACCEPTED
Enter the new security code. Once
the new code is entered, the display
will automatically ask that the new
code be re-entered for verification.
If the same new code is re-entered,
the display will confirm that the new
code has been accepted and return to the Main Screen. If the
new code is re-entered incorrectly, the display will return to
the “Enter New Code Number” screen and the process will
repeat.
If you forget or misplace your security code, you can call Titan
customer service for assistance.
i
To inactivate the Anti-Theft Digital Lockout
security function, enter “1111” at the “Enter New
Code Number” screen (this is the default code
that leaves the sprayer unlocked). As a result, the
Main Screen will appear at sprayer startup.
prime Screen
PRIME
The Prime screen appears when the
pressure control knob is set at the
“MIN” setting.
i
If there is no action at any menu screen for 10
seconds, the display will go back to the Main
Screen.
job cycles Screen*
JOB CYCLES
SELECT-4
MENU-1
The Job Cycles Screen shows the total
number of piston cycles a component
pump performs during a spray job.
CYCLES
XXXX
RESET-3
MENU-1
Pressing the #3 key will reset the
cycle count to zero. Pressing the #1
key will bring the control panel back to the Main Screen.
unit Serial # Screen
UNIT SERIAL #
SELECT-4
MENU-1
The Unit Serial # screen shows the
sprayer’s serial number.
SER # XXXXXXXXXX
MENU-1
To select the Unit Serial # screen,
press the #4 key.
Timers Screen
TIMERS
SELECT-4
MENU-1
The Timers screen shows the total
time the sprayer has been turned on
as well as the total time the sprayer
has been running (pumping).
ON TIME
RUN TIME
XXXX
XXXX
To select the Timers screen, press the
#4 key.
job Timers Screen
JOB TIMERS
SELECT-4
MENU-1
The Job Timers screen allows the
user to reset the “ON TIME” and “RUN
TIME” to track time on specific jobs.
JOB ON
X
RESET-3
MENU-1
JOB RUN
X
RESET-3
MENU-1
To select the Job TImers screen, press
the #4 key. “JOB ON” screen will
appear. Press #3 to reset. Press #1 to
continue to “JOB RUN” screen. Press
#3 to reset. Press #1 to scroll through the remaining menu
screens.
Service Time Screen
SERVICE TIME
SELECT-4
MENU-1
The Service Time screen allows the
user to set a service time interval
(in hours). Below the set time, the
screens shows the current amount
of hours on the sprayer since the last
activation of the service timer. To select the Service Timer
screen, press the #4 key.
SERVICE @ XX
RUN HOURS XX
To set the service time, press the #2
(up) and/or the #3 (down) keys to the
desired time (run hours will increase/
decrease in increments of 1 for each
time you press a key).
When the service time interval is set and met by the run hours,
the display will show a “Service Required” screen. The pump
will remain functional. To return to the Main Screen, press the
#1 key. Doing so will reset the “Service @” and “Run Hours”
displayed on the Service Screen back to 0.
Содержание HELIX 0138011
Страница 12: ...12 SYSTEM DESCRIPTION HELIX A E D F L1 J H K K J N M M B H L2 G I C 3 3 System Diagram with circulation ...
Страница 44: ...44 HELIX Spare parts diagram drive assembly 4 5 6 1 2 3 7 8 9 10 11 18 17 12 13 14 15 16 ...
Страница 50: ...50 HELIX Spare parts diagram fluid section 1 2 3 4 7 8 15 16 17 18 19 20 21 22 23 9 10 11 12 13 14 5 6 ...