19
Control panel
HELIX
4.5
coNTrol DISplAyS error meSSAgeS
The following error message screens appear whenever the
Control Display detects a problem with the system. Once a
problem occurs and the error message appears, the system will
shut down.
Before proceeding, follow the Pressure Relief
Procedure outlined in this manual. Additionally,
follow all other warnings to reduce the risk of
an injection injury, injury from moving parts or
electric shock. Always unplug the system before
servicing!
check Transducer Screen
CHECK
TRANSDUCER
The Check Transducer screen appears
when the transducer has become
disconnected or is defective. Take the sprayer to a Titan
authorized service center for repair.
check potentiometer Screen
CHECK
POTENTIOMETER
The Check Potentiometer screen
appears when the potentiometer has
become disconnected or is defective. Take the sprayer to a
Titan authorized service center for repair.
low voltage Screen
LOW
VOLTAGE
The Low Voltage screen appears
when the sprayer shuts down
because of low input voltage. Check the power supply and
correct the problem. Restart the system.
high motor Temperature Screen
HIGH MOTOR
TEMPERATURE
The High Motor Temperature screen
appears when the temperature of
the motor has risen too high. Take the sprayer to a Titan
authorized service center for repair.
high mechanical load
HIGH MECHANICAL
LOAD
The High Mechanical Load screen
appears when the sprayer shuts
down because of high current or when the sprayer goes into
current fold back mode. Take the sprayer to a Titan authorized
service center for repair.
pSI Imbalance
PSI IMBALANCE
UNLINK 3
The PSI Imbalance screen appears
when there is a non-allowable
pressure discrepancy between the (A) and (B) pumps while
linked. If a PSI imbalance occurs, press the #3 key to unlink the
two pumps. Once the pumps are unlinked, press the #1 key to
return to the Main Screen.
Содержание HELIX 0138011
Страница 12: ...12 SYSTEM DESCRIPTION HELIX A E D F L1 J H K K J N M M B H L2 G I C 3 3 System Diagram with circulation ...
Страница 44: ...44 HELIX Spare parts diagram drive assembly 4 5 6 1 2 3 7 8 9 10 11 18 17 12 13 14 15 16 ...
Страница 50: ...50 HELIX Spare parts diagram fluid section 1 2 3 4 7 8 15 16 17 18 19 20 21 22 23 9 10 11 12 13 14 5 6 ...