![background image](http://html1.mh-extra.com/html/titan/helix-0138011/helix-0138011_operating-manual_1119425020.webp)
20
Setup
HELIX
5. Attach the transfer pump air hose to their individual air
fittings.
6. Connect the other end of the transfer pump air hose to the
powered air pressure supply.
i
Do not install shutoff valves downstream of the
prime tubes. The PRIME/SPRAY valves function
as overpressure relief valves when set to SPRAY.
5
SeTup
In order to prevent accidental startup, make sure
the system’s power cord is not connected during
setup, until instructed to do so.
Make sure the air pressure supply is shut off while
connecting any air hoses to the air supply.
5.1
locATe The SySTem
1. Locate the system on a level surface. Refer to dimensions
in section 2.2 for clearance and mounting hole dimensions.
2. Mount in a dry area.
3. For best results, the machine should be bolted into place.
5.2
INSTAll The TrANSfer pumpS
i
The transfer pumps draw material directly from
the spray material container to component
pumps in the system. The transfer pumps are
powered by an air compressor.
Refer to section 3.1 for the corresponding illustrations to the
steps below.
1. Install the transfer pumps into Component A and
Component B supply containers.
a. With certain exceptions, the “A” component (hardener)
should be located on the “A” side of the system.
b. With certain exceptions, the “B” component (resin)
should be located on the “B” side of the system.
i
Consult the spray material’s manufacturer
if you are unsure about which Component
Pump is compatible with each individual spray
component.
2. Seal the container holding Component A material and
install the desiccant dryer in the vent hole.
3. If necessary, install an agitator into the Component B
material container.
4. Make sure the Component A and Component B inlet
valves are in the closed position (handle should be 90º to
the valve).
Содержание HELIX 0138011
Страница 12: ...12 SYSTEM DESCRIPTION HELIX A E D F L1 J H K K J N M M B H L2 G I C 3 3 System Diagram with circulation ...
Страница 44: ...44 HELIX Spare parts diagram drive assembly 4 5 6 1 2 3 7 8 9 10 11 18 17 12 13 14 15 16 ...
Страница 50: ...50 HELIX Spare parts diagram fluid section 1 2 3 4 7 8 15 16 17 18 19 20 21 22 23 9 10 11 12 13 14 5 6 ...