29
Table 8
Detergent description
Manufacturer
Country of origin
Stainless steel cleaning spray “Stainless
Steel Cleaner And Polish”
3M
Group of European
companies
Cleaning fluid “Well Done”
Well Done
Hungary
Stainless steel products and other metals
cleaner “XANTO STEEL 3in1”
XANTO
United Kingdom
«Dr.BECKMANN»
Dr.Beckmann
Germany
Cleaning
solution
“Reinex
Edelstahlreiniger”
Reinex
Germany
Cleaning spray “Stainless steel cleaner”
Onish
United Kingdom
3.3.3 Periodic maintenance for the purpose of defect detection and remedy is performed at
least twice a year and includes as follows:
visual inspection of the turnstile body, actuating mechanism and other
components for absence of external damages (corrosion, warps and other
mechanical defects and pollutions);
visual inspection of connecting, network and earthing cable condition;
verification of the turnstile performance;
during manual control in the modes specified in Table 7 or when identification
cards are used;
verification of reliability of the turnstile screw joints and earthing connections;
4 ROUTINE MAINTENANCE
4.1 Possible malfunctions
Possible malfunctions of the turnstile and their remedies are listed in Table 10.
ВНИМАНИЕ:
IMPORTANT:
INSPECTION, CLEANING, REPAIR OF THE TURNSTILE COMPONENTS
TO BE PERFORMED ONLY AFTER THE TURNSTILE IS DEENERGIZED !!
4.2 Possible malfunctions
Possible malfunctions of the turnstile and their remedies are listed in
Table 9
.
Table 9
Symptom
Possible cause
Remedy
1
2
3
Turnstile does not
operate when
energized
There is no mains power
supply.
Idle power cable.
Power supply unit is out of
order.
AC power to be recovered.
Power supply cable to be connected.
Power supply unit to be replaced..
Blade does not open
Belt is damaged.
Magnetic sensor is adjusted
improperly.
Magnetic sensor is out of
order.
Magnetic sensor to be replaced.
Belt to be replaced.
Magnetic sensor to be adjusted or
PCB to be replaced.
Proper connection of ACS to input -
output terminals on controller board
