3
INTRODUCTION
This Operation Manual (hereinafter referred to as OM) covers the servo
-
operated waist
-
high
turnstile of “SpeedBlade" type (hereinafter referred to as the "turnstile"). The Operation Manual
contains information about design, specifications, installation for proper operation and
maintenance of the turnstile.
This Operation Manual is prepared in compliance with the specification requirements ТU U
31.6
-
32421280
-
004:2010.
The turnstile shall be serviced only by the qualified staff having the relevant class of permit
to work with electrical facilities with voltage up to 1000V and scrutinizing this Operation Manual,
obtaining safety instructions and trained for operation and maintenance of the turnstile. Reliability
and durability of the turnstile operation is provided with observation of modes and conditions of
transportation, storage, installation and operation. So, fulfillment of all requirements specified in
this document is mandatory.
The turnstile “SpeedBlade" can be installed either singly or in line. The single turnstile
includes two pedestals (left
-
hand and right
-
hand), each of which has one telescopic glass blade.
The turnstile row is provided by installation one more or a number of additional pedestals
equipped with glass blades from both sides reducing costs and saving space.
Depending on the purpose and design features of the turnstile, the following pattern of
reference designation is accepted:
T3. KCD. X V. Х
Floor-standing
X
Number (one and more) of
waist-high turnstile
turnstile access ways
Pedestal with servomotor
KC
Reciprocating mechanism
Double
-
blade
D
P
Polished stainless steel
S
Brushed stainless steel
K
Painted housing
Example of reference designation of single waist-high turnstile consisting of left-hand and
right-hand pedestals made of brushed stainless steel when the turnstile
T3.КСD.SV.1
ТU U 31.6
-
32421280- 004:2010 is ordered.
Example of reference designation of double waist-high turnstile consisting of left-hand and
right-hand and one additional pedestals made of polished stainless steel when the turnstile
T3.КСD.РV
.2
ТU U 31.6
-32421280-004:2010 is ordered.
Due to regular improvement of the product its design can be modified without degradation
of the product features and quality not covered by this Operation Manual.
