18
2 INTENDED USE
2.1 Operation restrictions
2.1.1The turnstile must be used in the environment specified in p. 1.1.4 of this document
subject to the specifications listed in section 1.2.
IT IS FORBIDDEN:
1)
TO MISUSE THE TURNSTILE (See Section 1 "DESCRIPTION
OPERATION");
2) TO USE THE TURNSTILE UNEARTHED;
3) TO USE HEATING PIPES AND RADIATIONS AS WELL AS PIPES
CENTRALOF WATER SUPPLY FOR EARTHING;
4) TO REPAIR AND ADJUST WITHOUT DEENERGIZATION.
5) TO RELOCATE THE OBJECTS EXCEEDING THE ACCESS WAY
THROUGWIDTH THE TURNSTILE ACCESS AREA;
6) TO JERK AND IMPACT ANTICROSSING BLADES, LED DISPLAY OR
PAROTHERSOF
THE
PRODUCT,
WHICH
MAY
CAUSE
THEIR
MECHANICAL DISTORTION OR DAMAGE;
2.1.2 It is forbidden to use the turnstile
:
–
at the presence of mechanical rattle in movable parts of the turnstile;
–
when metalwork of the turnstile and its components and accessories are mechanically
damaged.
2.1.3
List of special conditions of operation
Mean time of the turnstile access (in single access mode) equals to 2 sec.
Escape door, portal or pedestrian gate can be installed near the turnstile to increase the
turnstile traffic flow capacity in case of emergency.
IMPORTANT:
THE MANUFACTURER WARNS OF THE NECESSITY TO KEEP THE
MANUFACTURER’S SEALS ON THE TURNSTILE COMPONENTS
!
2.2 Layout and installation
2.2.1 The turnstile and components of the scope of supply to be delivered to installation site
in factory packing. The turnstile to be unpacked only on installation site.
2.2.2
Preparation of the turnstile for installation (dismounting) and commissioning to be
performed according to this OM with mandatory observation of safety measures according to in p.
2.1 and general electrical safety code.
WARNING:
The turnstile damage occurred during transportation is not covered by the
manufacturer’s warranty obligations
2
.2.3 Safety measures:
Installation to be performed only by the persons briefed on safety and studied this
manual;
Only serviceable tools to be used during the turnstile installation;
Connection of all cables to be performed only when power supply is OFF;
