8
–
controllers;
–
seven access sensors;
–
proximity identification card reader*;
–
power supply unit.
Optionally the pedestal can be completed with battery*. For the single turnstile a control
panel with power supply unit, automatic circuit-breaker and battery is installed only inside the
pedestal
Master
on the protected
area side.
Fig. 2
–
Design of the single turnstile of
“SpeedBlade” Т3.КСD.ХV.1
type
1.3.3 Design of the turnstile of “SpeedBlade” type placed in line
The double turnstile is a set of two one-blade pedestals (left-hand and right-hand) and one
additional pedestal with two retractable glass blades. The body of additional pedestal includes:
–
frame;
–
base;
–
set of side panels and doors;
–
top lid;
–
two actuators with glass blades;
–
four LED displays.
There are installed inside additional pedestal;
–
two terminal blocks;
–
controllers;
–
fourteen access sensors;
–
two proximity identification card readers
;
–
power supply unit.
Optionally the additional pedestal can be completed with battery
*
It is outside the turnstile scope of supply
–
to be equipped by customer, when applicable.
1
–
location of identification card
readers and LED display;
2
–
side LED display;
3
–
access sensor;
4
–
telescopic glass blade;
5
–
turnstile base;
6
–
lid;
7
–
actuator;
8
–
turnstile body.
