manualshive.com logo in svg

ThinkRF WSA5000 Series, Руководство программиста, Страница: 100 / 101

Поделиться
Скачать
ThinkRF WSA5000 Series Скачать руководство пользователя страница 100

Document Revision History

Document 
Version

1

Release 
Date

Revisions and Notes

v3.2.4

May.19.2014

- Added
   + 

:SYSTem:COMMunicate:LAN:CONFigure

 and others LAN 

commands to change the WSA LAN settings
   + [:SENSe]:FREQuency:INVersion? command for determining 
when spectral inversion is required for a given frequency
   + New notes to 

Table 2

, 

:INPut:MODE

, and 

:OUTput:IQ:MODE 

regarding RFE mode availability due to product model dependency

v3.2.5

June.06.2014 - Added USB console control connection and some correction to

Figure 2

- New note to 

Table 2

 regarding SH/SHN modes and the decimation 

usage

v3.2.6

June.10.2014 - Corrected the tuning resolution for HDR to be 100kHz

v3.3.0

July.21.2014

- Data output type for SH/SHN mode with Decimation will now be I 
and Q.  See 

Table 2

 for details.

- Replace [:SENSe]:FREQuency:INVersion? With

:OUTput:IQ:CONNector:INVersion?

- Enable frequency level trigger command 

:TRIGger:LEVel

- Caution note for using external 10MHz refence source in  the

:SOURce:REFerence:PLL

 command

v3.3.1

Aug.11.2014

- Corrected the equation for calculating the absolute power level in 
the 

Reference Level 

section

- Corrected the level parameter in 

:TRIGger:LEVel

 to be a signed 

integer type instead of double
- Added limitation to the maximum allowable trigger level for the

Frequency Domain Triggering

 basing on the attenuation setting; and 

removed the mentioning of the dependency on the gain settings.

v3.3.2

Oct.15.2014

- Corrected 

:TRIGger:STATus?

 

to be unavailable

- Corrected the absolute power level formula in the 

Reference Level

 

section
- Updated the 

Conventions

 section with the meaning of different fonts 

used in the document

v3.3.3

Nov.17.2014

- Added notes regarding IQIN mode not available in product version 
2.2

v3.4.0

Nov.26.2014

- Corrected frequency tuning information regarding DD and IQIN 
mode as well as the data output for DD mode in 

Table 2

 and

[:SENSe]:FREQuency:CENTer

- Changed HDR maximum gain to 34 and default to 25 for the

:INPut:GAIN:HDR

 command

- Clarified the definition of maximum value for 

:TRACe:SPPacket

, 

especially with I

14

 format

- Corrected the optional [:DATA] part of the 

:TRACe:BLOCk:DATA?

 

command to be non-optional
- Reorganized alphabetically some commands within groups of 
specific function across the document
- Removed PSD data output feature and all references to PSD
- Removed the whole :CALibrate section

v3.4.1

Jan.26.2015

- Minor correction to 

:TRACe:SPPacket

 and 

Appendix C

 sections

v3.5.0

Feb.16.2015

- Added support for WSA5000-XXX-HIF model (code 002 for

:SYSTem:OPTions?

 and 

:INPut:MODE[?] 

HIF)

- Added the new command 

[:SENSe]:FREQuency:IF?

 for determining

the IF frequencies used for the current input mode and center 
frequency

v3.5.1

Jun.10.2015

- Added 

:INPut:ATTenuator:VARiable[?]

 command for WSA5000-418 

100

ThinkRF WSA5000 Wireless Signal Analyzer Programmer's Guide

Содержание WSA5000 Series






































































































Отзывы:

Нет отзывов