ThinkRF WSA5000 Series Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 101

ThinkRF WSA5000 Series Скачать руководство пользователя страница 48

SCPI Command Set

:SYSTem:COMMunicate:LAN:DNS

The set command will store the new LAN DNS server address(es) to be applied to the
WSA. This command does not take effect until

:SYSTem:COMMunicate:LAN:APPLy

is

sent (please refer to the Caution note of the :APPLy command). Once the setting is
applied, it is not affected by power-on,

, or

The query will return the LAN DNS address(es) set or that of the actual current
configuration if one is not issued. The CURRENT query will return what is currently and
actually used by the WSA's LAN interface.

Syntax

SYSTem:COMMunicate:LAN:DNS <main DNS>[,alternative DNS]
SYSTem:COMMunicate:LAN:DNS? [CURRENT]

Parameter

Set: D.D.D.D[,D.D.D.D] where D = 0 – 255
Query: [CURRENT]

Response

D.D.D.D[,D.D.D.D]

I/O Data Type String

*RST State N/A

Examples

SYSTEM:COMMUNICATE:LAN:DNS 208.67.110.0
SYST:COMM:LAN:DNS 208.67.110.0,208.67.100.10

SYSTEM:COMMUNICATE:LAN:DNS?
SYST:COMM:LAN:DNS? CURRENT

:SYSTem:COMMunicate:LAN:GATEway

The set command will store the new LAN gateway to be applied to the WSA. This
command does not take effect until

:SYSTem:COMMunicate:LAN:APPLy

is sent (please

refer to the Caution note of the :APPLy command). Once the setting is applied, it is not
affected by power-on,

, or

The query will return the gateway address set or that of the actual current configuration if
one is not issued. The CURRENT query will return what is currently and actually used by
the WSA's LAN interface.

Syntax

SYSTem:COMMunicate:LAN:GATEway <IPv4 address>
SYSTem:COMMunicate:LAN:GATEway? [CURRENT]

Parameter

Set: D.D.D.D where D = 0 – 255
Query: [CURRENT]

Response

D.D.D.D

I/O Data Type

String

*RST State

N/A

Examples

SYST:COMM:LAN:GATEWAY 102.101.0.13

SYSTEM:COMMUNICATE:LAN:GATEWAY?
SYST:COMM:LAN:GATE? CURRENT

:SYSTem:COMMunicate:LAN:IP

The set command will store the new LAN IP to be applied to the WSA. This command
does not take effect until

:SYSTem:COMMunicate:LAN:APPLy

is sent (please refer to the

48

ThinkRF WSA5000 Wireless Signal Analyzer Programmer's Guide

«
...
46
47
48
49
50
...
»

Содержание WSA5000 Series






































































































Отзывы:

Нет отзывов