Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
32
Chapter 3
|
Touchscreen Console setup
3.1.2 Adding modules to the Home screen
The Touchscreen Console uses “modules” to identify the functions
users are able to access. Section 3.2.3 provides overview information
about each module. Follow the steps below to add the modules you
would like to use to the Home screen.
1. First-time users will see the Configure Modules screen (Figure 3.2)
after turning on the Touchscreen Console. Select
Start
to begin.
Figure 3.2. Configure Modules screen appears at
initial setup.
2. The Mixer Type screen (Figure 3.3) appears, allowing you to
select Vessel type and size. Touch the Vessel type field and select
imPULSE mixer
, and then touch the Vessel size field and select the
size that corresponds to your mixer. When you are finished, touch
Next.
Figure 3.3. Mixer Type screen.
