ThermoFisher Scientific HERASAFE 2030i Series, Руководство по эксплуатации

Страница: 103 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 93
Operation |
Chapter 6
Alternatively, you can also tap the “Alarms and Alerts” icon on the Main
Navigation Bar to open the “Alarms and Alerts” screen.
3. Tap the “Window Alarm Tone” dropdown menu and choose an option.
4. Save your changes as explained in the section “Saving Changes” on page 95, or
change any other desired option on the “Alarms and Alerts” screen.
Airflow Alarm Tone
You may change the alarm tone for low or high airflow conditions directly on the main
“Alarms and Alerts” screen by just tapping on the dropdown list labeled “Airflow Alarm
Tone” (see Figure 87 below) and selecting one of the three options.
Figure 88 “Alarms and Alerts” Screen: Airflow Alarm Tone Options
Proceed as follows to change the airflow alarm tone:
1. Tap the “Settings” icon on the Main Navigation Bar.
2. Tap the “Alarms and Alerts” button on the “Settings” screen.
Alternatively, you can tap the “Alarms and Alerts” icon on the Main Navigation
Bar to open the “Alarms and Alerts” screen.
3. Tap the “Airflow Alarm Tone” dropdown menu and choose an option.
4. Save your changes as explained in the section “Saving Changes” on page 95, or
change any other desired option on the “Alarms and Alerts” screen.
Snooze Timeout
You may set the timeout period during which an alarm is temporarily silenced when you
press the “Snooze” button directly on the main “Alarms and Alerts” screen. This is done
by tapping on the dropdown list labeled “Snooze Timeout” (see Figure 89 below) and
selecting one of the periods.
NOTE The options may be named differently, depending on the country.
Airflow Alarm Tone Tone 1
Tone 2
Tone 3
NOTE Applicable BSC standards in effect may not allow temporary muting of
audible alarm.