ThermoFisher Scientific HERASAFE 2030i Series, Руководство по эксплуатации

Страница: 12 / 173

| General Notes
2
|
50155215 Herasafe 2030i / Maxisafe 2030i
Chapter 1
General Safety Instructions
These safety instructions describe the safety features of the Herasafe 2030i and
Maxisafe 2030i series.
The safety cabinet has been manufactured in keeping with the latest technological
developments and has been tested before delivery for its correct function. It may, however,
present potential hazards if it is not used according to the intended purpose or outside of
operating parameters. Therefore, the following procedures must always be observed:

The safety cabinet must be operated only by trained and authorized personnel.

For any operation of this unit, the operator must prepare clear and concise written
instructions in the language of the operating and cleaning personnel based on these
operating instructions, applicable safety data sheets, plant hygiene guidelines, and
technical regulations, in particular:

which decontamination measures are to be applied for the cabinet and accessories,

which protective measures apply while specific agents are used,

which measures are to be taken in the case of an accident.

Repairs to the device must be carried out only by trained and authorized expert personnel.

The contents of the operating instructions are subject to change without further notice.

Concerning translations into foreign languages, the English version of these operating
instructions is binding lease.

Keep these operating instructions close to the unit so that safety instructions and
important information are always accessible.

Should you encounter problems that are not detailed adequately in these operating
instructions, please contact Thermo Electron LED immediately for your own safety.
Use this product only in the way described in the product literature and in this manual.
Before using it, verify that this product is suitable for its intended use. If the equipment is
used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
Your unit must be properly grounded in conformity with national and local electrical
codes. Do not connect the unit to overloaded power sources.
Disconnect the unit from all power sources before cleaning, troubleshooting, or
performing other maintenance on the product or its controls.