manualshive.com logo in svg

ThermoFisher Scientific HERASAFE 2030i Series, Руководство по эксплуатации

Поделиться
Скачать
ThermoFisher Scientific HERASAFE 2030i Series Скачать руководство пользователя страница 135

Herasafe 2030i / Maxisafe 2030i

50155215

 |  

125

Shut-down

Interrupting an Operation

To interrupt a work process, the fans can be switched off. 

1. Remove all samples from the safety cabinet and store them properly.

2. Remove accessories from the sample chamber and clean and disinfect them.

3. Clean and disinfect the sample chamber surfaces, the workplate, and the drain pan.

4. Switch the fans off.

Shutting the Unit down

If the unit is not to be used or stored for an extended period of time, it must be completely 
decontaminated. 

1. After the device has been decontaminated, close the front window completely.

2. Disconnect the device from the power supply system.

Decontamination measures!
To shut the device down, the sample chamber must be disinfected completely
and the plenum, including the filters, must be sterilized using formaldehyde. 

Содержание HERASAFE 2030i Series














































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды