ThermoFisher Scientific HERASAFE 2030i Series, Руководство по эксплуатации

Страница: 105 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 95
Operation |
Chapter 6
3. Tap the “Alert Volume” dropdown menu and choose an option.
4. Save your changes as explained in the section “Saving Changes” on page 95, or
change any other desired option on the “Alarms and Alerts” screen.
Alert Tone
You may choose an alert tone directly on the main “Alarms and Alerts” screen by just
tapping on the dropdown list labeled “Alert Tone” (see Figure 91 below) and selecting one
of the three options.
Figure 91 “Alarms and Alerts” Screen: Alert Tone Options
Proceed as follows to change the alert tone:
1. Tap the “Settings” icon on the Main Navigation Bar.
2. Tap the “Alarms and Alerts” button on the “Settings” screen.
Alternatively, you can tap the “Alarms and Alerts” icon on the Main Navigation
Bar to open the “Alarms and Alerts” screen.
3. Tap the “Alert Tone” dropdown menu and choose an option.
4. Save your changes as explained in the section “Saving Changes” on page 95, or
change any other desired option on the “Alarms and Alerts” screen.
Saving Changes
The “Save” button at the bottom of the screen lets you commit any changes you have
made to the setup. The “Save” button will appear as soon as you make any changes to
any of the dropdowns on the screen.
1. When you are done making settings, tap the “Save” button.
A pop-up window appears, stating that “Your settings have been saved.”. A header in
the top left corner states: “Settings saved”.
Figure 92 “Settings Saved” Screen
Alert Tone Tone 1
Tone 2
Tone 3
Your settings have been saved.
Settings Saved
OK