ThermoFisher Scientific HERASAFE 2030i Series, Руководство по эксплуатации

Страница: 102 / 173

| Operation
92
|
50155215 Herasafe 2030i / Maxisafe 2030i
Chapter 6
Alarm Volume
You may change the volume of the alarm tone directly on the main “Alarms and Alerts”
screen by just tapping on the dropdown list labeled “Alarm Volume” (see Figure 86 below)
and selecting one of the four “Off”, “Low”, “Medium”, or “High” options.
Figure 86 “Alarms and Alerts” Screen: “Alarm Volume” Options
Proceed as follows to change the alarm volume:
1. Tap the “Settings” icon on the Main Navigation Bar.
2. Tap the “Alarms and Alerts” button on the “Settings” screen.
Alternatively, you can also tap the “Alarms and Alerts” icon on the Main
Navigation Bar to open the “Alarms and Alerts” screen.
3. Tap the “Alarm Volume” dropdown menu and choose an option.
4. Save your changes as explained in the section “Saving Changes” on page 95, or
change any other desired option on the “Alarms and Alerts” screen.
Window Alarm Tone
You may change the alarm tone for the front window directly on the main “Alarms and
Alerts” screen by just tapping on the dropdown list labeled “Window Alarm Tone” (see
Figure 87 below) and selecting one of the three options.
Figure 87 “Alarms and Alerts” Screen: Window Alarm Tone Options
Proceed as follows to change the window alarm tone:
1. Tap the “Settings” icon on the Main Navigation Bar.
2. Tap the “Alarms and Alerts” button on the “Settings” screen.
Alarm Volume High
Medium
Low
Off
The alarm volume should be adjusted in the “Alarms and Alerts” screen
according to the sound level of the environment lab.
NOTE The naming of the options may differ in each country.
Window Alarm Tone Tone 1
Tone 2
Tone 3