manualshive.com logo in svg

Thermo 335904, Руководство оператора, Страница: 66 / 94

Поделиться
Скачать
Thermo 335904 Скачать руководство пользователя страница 66

3.

Press 

ENTER

. The 

Internal Printer Test

screen appears.

4.

Press 

Start Test

to run the test. The test print

routine appears on the printer.
While the test is running, you can press 

Stop

Test

to stop it.

If the test fails, follow these guidelines:
•

Make sure that the internal printer is the
selected printer device on the 

Utilities

screen.

•

Make sure that the internal printer is installed
correctly. (Return to the main screen and press

ENTER

. If the paper does not move, the printer

may not be installed correctly.)

•

Make sure that the thermal paper is threaded
with the thermal side toward the printer head
(the outside surface of the roll is the thermal
surface).

•

Contact technical support for more
troubleshooting advice.

RS232C Test

The RS232C test allows you to verify that the
RS232C port is functional. To run the test, you will
need to have the RS232 Test Plug (336035)
attached to the RS232C port on the back panel of
the instrument. Running the RS232C test takes
approximately five minutes.

1.

Verify that the RS232 Test Plug is securely
attached to the RS232C port on the back panel
of the instrument.

2.

With the 

Performance Validation

screen

displayed, use the arrow keys to highlight

RS232C Test

.

3.

Press 

ENTER

. The 

RS232C Test

screen

appears.

4.

Press 

Start Test

to run the test. When the test

is complete, the message "RS232 OK" or
RS232 Failed" appears on the screen.
While the test is running, you can press 

Stop

Test

to stop it.

If the test fails, follow these guidelines:
•

Make sure that the test plug is installed
correctly and is not loose or damaged.

•

Contact technical support for more
troubleshooting advice.

Using the Performance Validation Program

Thermo Electron Corporation

4-6

Содержание 335904































































































Отзывы:

Нет отзывов